Safe operation of hydraulic cutting machine
1. The power indicator is normal; 2. No sundries are stored on the equipment3. The equipment wires are not exposed and the screws are not loose;4. There are no irrelevant personnel or obstacles around the equipment;5. Check whether the grinding wheel is complete and firm; 6. Put the sample into the card slot with iron tongs to lay it flat, open the hydraulic device to press and close the cover to cut slowly7. Cut the sample, close the equipment, open the protective cover, release the hydraulic device, clip the sample and put it into water for cooling; 8. After the sample is cooled, start the equipment to polish and smooth the cut surface of the sample
