Dec 19, 2018 Leave a message

Introduction to the installation of a 12-inch high SPL car subwoofer

The 12-inch high SPL car subwoofer adds a subwoofer (especially active) to the original sound system, which increases the dynamic range of the system and makes the low-frequency dive deeper. At the same time, it will make the MF's transparency better, and the sound can be more unrestricted.

Thanks to the increased push power and woofer, the sound system can reproduce the peak of the music at a higher level. And because the main speaker is no longer responsible for the playback of the bass, it can be played with a louder sound. Moreover, the cone of the woofer of the main speaker no longer needs to be moved forward and backward as before, so the midrange will be clearer when used for reproducing music.

The 12-inch high SPL car subwoofer specializes in the bass section, unlike the woofer. Can provide more shocking or dynamic things.

Installation of 12-inch high SPL car subwoofer: steps

Select the subwoofer. There are many types of subwoofers on the market, depending on the sound quality and position of the installation, which subwoofer to choose.

Choose an installation location. It is generally recommended to install it under the seat in the middle of the car. The sound is turned on and the whole car has a good music effect.

Positive cloth line. Take power from the positive pole of the battery, install a fuse on the line, lead the harness through the appropriate position into the car, install a switch in the cab, screw the end of the wire to the positive terminal of the subwoofer, and also connect the REM line to the positive pole. Share a line,

Install the negative wire. The car is grounded by the body itself, and the ground wire can be attached to the screws of the fixed seat.

Install the audio cable. You can connect the cable from the original car speaker, install the audio interface, plug it into the subwoofer jack with a dedicated audio harness, or connect the cable to the subwoofer audio interface from the speaker.

Adaptation. Once the subwoofer is installed, you can manually adjust the volume through the buttons above and choose the sound that suits you.

If everyone has carefully read it, then everyone should be able to install it themselves. If you still don't understand it, then you can follow the steps and do it without worry. This is a chance to exercise yourself. Then everyone must be good. Do it

 


Send Inquiry

whatsapp

Phone

E-mail

Inquiry